Recommended Starting Laser Settings for LP5
As we continue to refine the algorithm controlling our machines, we maintain strict quality standards for the final engraving results. However, due to variations in firmware versions, some parameters may differ, leading to slight variations in output. To ensure clarity, we will document all test results along with their corresponding firmware versions for your reference. Rest assured, our team is committed to keeping this information as up-to-date as possible!
You can also find all these settings in our LDS PC software (version 2.9.x or higher) and LDS App(5.9.x or higher) now. At the same time, you may download the full version PDF of LaserPecker material datasheets HERE.
| 1064nm (FL - 150 mm) | 450nm (FL - 150 mm) | 1064nm (FL - 152 mm) | 450nm (FL - 152 mm) | |||
|---|---|---|---|---|---|---|
| Material | Processing | Resolution | Power(%) / Depth(%) | Power(%) / Depth(%) / Frequency(kHz) | Power(%) / Depth(%) | |
| Aluminum Oxide | Fill | 1k | / | / | / | / |
| 2k | 60 / 27 / 50 | 53 / 58 | 80 / 27 / 50 | 54 / 58 | ||
| 4k | / | / | / | / | ||
| Picture | 1k | / | / | / | / | |
| 2k | / | / | / | / | ||
| 4k | / | / | / | / | ||
| Line Engraving | 1k | 30 / 47 / 50 | 53 / 40 | 45 / 47 / 50 | 70 / 40 | |
| 2k | / | / | / | / | ||
| 4k | / | / | / | / | ||
| Stainless Steel (1 mm) | Fill | 1k | / | / | / | / |
| 2k | 40 / 34 / 50 | 77 / 68 | 80 / 34 / 50 | 83 / 68 | ||
| 4k | / | / | / | / | ||
| Picture | 1k | / | / | / | / | |
| 2k | / | / | / | / | ||
| 4k | / | / | / | / | ||
| Line Engraving | 1k | 30 / 30 / 50 | 70 / 77 | 60 / 30 / 50 | 85 / 77 | |
| 2k | / | / | / | / | ||
| 4k | / | / | / | / | ||
| Copper | Fill | 1k | / | / | / | / |
| 2k | 45 / 40 / 50 | / | 75 / 40 / 50 | / | ||
| 4k | / | / | / | / | ||
| Picture | 1k | / | / | / | / | |
| 2k | / | / | / | / | ||
| 4k | / | / | / | / | ||
| Line Engraving | 1k | / | 40 / 67 | / | / | |
| 2k | / | / | / | / | ||
| 4k | / | / | / | / | ||
| Titanium | Fill | 1k | / | / | / | / |
| 2k | 18 / 33 / 50 | / | 40 / 33 / 50 | / | ||
| 4k | / | / | / | / | ||
| Picture | 1k | / | / | / | / | |
| 2k | / | / | / | / | ||
| 4k | / | / | / | / | ||
| Line Engraving | 1k | / | / | / | / | |
| 2k | / | / | / | / | ||
| 4k | / | / | / | / |
Pro Tips
- Test on scrap material first to dial in settings.
- Air assist improves cut quality on organic materials.
- Vary depth/power to balance detail and production time.
For advanced techniques and troubleshooting, refer to specific material guides in our support center.
What to provide your material parameters or correct us by submitting a ticket?
Join our Facebook Group for user-shared settings!
